You are here: Home » Product Category » Cosmetic Raw Materials » Cosmetic grade 99.5% ɑ-Arbutin Powder CAS 84380-01-8

loading

Share to:
sharethis sharing button

Cosmetic grade 99.5% ɑ-Arbutin Powder CAS 84380-01-8

Availability:
Quantity:
  • 99.5% ɑ-Arbutin

  • Nanjing Gemsen

  • CAS 84380-01-8

Introduction:


Product name

Arbutin; Alpha-Arbutin; α-Arbutin

CAS No.

84380-01-8

Appearance

White needle-like crystal or powder

Purity

≥99%

Sample

Available


Alpha-Arbutin is a cosmetic-grade, water-soluble active ingredient positioned for tone-evening and radiance support. Acting as a reversible, competitive inhibitor of tyrosinase, it offers greater hydrolysis resistance and potency compared to its natural β-form counterpart. Formulators typically incorporate it into the water phase under controlled temperature and pH conditions to ensure stability. Visible results include a more even-looking tone and a reduced look of dark spots, supported by consistent daily UV protection.


Specification:

Items Specifications Result
Description White needle-like crystal or powder White crystal
Melting Point 202.0℃-206.0℃ Conforms
pH 5.0~7.0 6.21
Specific rotation

+174.0°~+186.0°

+176.2°

Loss on drying

≤0.50% 0.03%

Heavy metals (Pb)

≤10 ppm Conforms
Arsenic ≤2 ppm Conforms
Residue on ignition ≤0.50% 0.12%
Purity ≥99.5% 99.9%
Hydroquinone Not detectable ND
Total Plate Count ≤300CFU/g Conforms


Application

Alpha-Arbutin is a water-soluble, cosmetic-grade active. Its practical application is governed by three formulation parameters: pH 5–7, processing below 40 °C, and adequate protection from light and moisture. The following sections organize common product formats by category.

1. Facial Care

Serums and Essences

  • Use level: 1–2%.

  • Formulation: Add to the water phase below 40 °C; target pH 5–7.

  • Compatibility: Pairs well with hyaluronic acid and niacinamide. Separate from low-pH vitamin C steps to avoid stability issues.

  • Packaging: Amber or opaque bottles; validated preservative system required.


Creams and Emulsions

  • Use level: 0.5–2%.

  • Formulation: Incorporate into the aqueous phase of O/W or W/O systems. Use buffer systems for pH control.

  • Stability: Verify three-month stability at 40 °C; avoid prolonged high-temperature holding.

  • Pairing: Compatible with ceramides and panthenol for barrier support.


Targeted Tone-Correcting Formats

  • Use level: 1–2%.

  • Format: Spot treatments or precision applicators.

  • Guidance: Pair with soothing agents to improve tolerability. Advise consumers on 8–12 weeks of consistent use and daily UV protection.


2. Body Care

Body Lotions and Creams

  • Use level: Up to 0.5% (SCCS/1642/22 limit).

  • Formulation: Check compatibility with body-care emulsifiers, thickeners, and fragrances.

  • Pairing: Combine with humectants and barrier lipids for larger application areas.


3. Sun Care and Color Cosmetics

Sun-Care Systems

  • Use level: 1–2%.

  • Guidance: Confirm pH and emulsion stability in SPF bases. Alpha-Arbutin does not replace UV filters.

  • Packaging: Opaque packaging and antioxidant co-formulants help limit degradation.


Tinted Makeup (BB/CC, Foundations)

  • Use level: 0.2–1%.

  • Guidance: Evaluate pigment interactions, color drift, and packaging compatibility. Encapsulated grades may reduce ingredient interactions.


4. Multi-Active Protocols

Combination Strategies

  • Actives: Frequently combined with niacinamide, tranexamic acid, and vitamin C derivatives.

  • Guidance: Separate low-pH vitamin C or strong AHA/BHA steps. Review total exposure to hydroquinone-releasing ingredients. Confirm final formula pH and stability.


Q&A


Q1. What is Alpha-Arbutin?
A water-soluble, cosmetic-grade glucoside derivative of hydroquinone, used for tone-evening and radiance support. It is distinguished from β-arbutin by the α-glycosidic configuration.


Q2. Alpha- vs. β-arbutin: what is the practical difference?
The α-form is generally more hydrolysis-resistant and more potent in published tyrosinase-inhibition comparisons. β-Arbutin occurs naturally in several plants and has a higher SCCS face-cream ceiling, but is usually regarded as less potent.


Q3. What is the recommended use level?
Typical use level: 0.2–2%, with 1–2% being the most commonly substantiated range. SCCS/1642/22 supports up to 2% in face creams and 0.5% in body lotions. Where higher label numbers appear, confirm the actual active concentration rather than the strength of a diluted stock.


Q4. Why is pH control critical?
Stability is strongest around pH 5–7, with practical support across pH 4.5–7.5. Very low pH combined with elevated temperature can increase hydroquinone formation; one aqueous study at pH 3.5 and 40 °C showed a marked rise after three months.


Q5. How should it be added?
Add to the water phase at below 40 °C with good mixing. Avoid prolonged high-temperature holding. Adjust to the target pH after the main emulsion or serum phase has formed.


Q6. Is it compatible with vitamin C, niacinamide, tranexamic acid, and acids?
Niacinamide and tranexamic acid are commonly used in multi-active tone protocols. Low-pH L-ascorbic acid and strong AHA/BHA systems may challenge stability or increase irritation potential; separate steps or use pH-stable derivatives.


Q7. What about stability and packaging?
The raw material has demonstrated stability for up to 36 months when properly packed and kept below 40 °C. Submitted stability studies generally show good recovery at pH 4.5–7.5. Protective packaging and validated preservative systems are advisable.


Q8. What is the regulatory position?
SCCS/1642/22 is the key European reference. Face creams up to 2%, body lotions up to 0.5%, β-arbutin face creams up to 7%, and aggregate exposure were assessed as acceptable. Hydroquinone should remain at unavoidable trace levels. Regional listings and limits should be checked before launch.


Q9. Hydroquinone control — what should formulators know?
Trace hydroquinone can arise as a raw-material impurity and through hydrolysis. Control raw-material quality, formula pH, processing temperature, and storage.


Q10. How should sensitive skin and pregnancy-related communication be handled?
Animal data classify Alpha-Arbutin as a weak skin sensitiser; human sensitisation data are limited. Patch testing is prudent. Reproductive-toxicity data are limited, so conservative labeling and professional consultation are appropriate.






Previous: 
Next: 

Product Category

CONTACT US
Nanjing Gemsen International Co., Ltd.
Cell/WhatsApp/WeChat: +8615251873798
E-mail: gs_101@gemsen.cn; info@gemsen.cn
Add: Suite 2003 Ruihua Mansion #315
Zhongshan Nanlu 210001 Nanjing China
Gemsen has been specializing in nutritional and healthy ingredients since 2004.
CONTACT US
Nanjing Gemsen International Co., Ltd.
Cell/WhatsApp/WeChat: +8615251873798
E-mail: gs_101@gemsen.cn;  info@gemsen.cn
Add: Suite 2003 Ruihua Mansion #315
Zhongshan Nanlu 210001 Nanjing China

QUICK LINKS

PRODUCTS CATEGORY

SIGN UP FOR OUR NEWSLETTER

Copyright © 2024 Nanjing Gemsen International Co., Ltd. All Rights Reserved. | Sitemap | Privacy Policy   苏ICP备18040487号-2